SP Airtool - High performance pneumatic PVC tubing
About Us Pneumatic Tools Tubing and Hoses Gas Springs Pneumatics Contact Form Product Search

SP Air > Pneumatics > Function Fittings

SP Airtool Product Database SearchSearch for Adapters and Fittings products

FLOW MICRO-REGULATOR

Series MRF N  
Series MRF N The flow micro-regulator regulates the speed of the piston rod in the pneumatic cylinders.
The configuration of micro-regulators type C (to mount on the cylinder inlet) and type V (to mount on the valve ports) gives full flow during supply and regulated flow during exhaust.
With type B (bidirectional) both the supply and exhaust flow rates can be adjusted. The adjusting knobs on SP Air's MFR's allows triple adjustment:manual operation on the milled section, screwdriver inserted in the relevant slot, and using a hex spanner. The MRF ring can be orientated even when mounted.


LINE-MOUNTED FLOW MICRO REGULATOR WITH PUSH IN FITTING

Series RFL R  
Series RFL R This LINE-MOUNTED flow micro-regulator with built in push-in fittings has the job to regulate the air supply and thus the speed in pneumatic actuators.
Two versions are available:
-type U (unidirectional) regulates the flow only in one of the two directions of air flow.
Configurations:
  • Push-in fitting at the inlet and outlet
  • Push-in fitting at the inlet and threaded port at the outlet (cylinder)
  • Threaded port at the inlet and push-in fitting at the outlet (Valve)
  • -type B (bidirectional) regulates the flow only in both directions of air flow.
    Configurations:
  • Push-in fitting at the inlet and outlet
  • Threaded port and push-in fitting

  • There are three fixing options.

    IN-LINE FLOW MICRO REGULATOR

    Series RFL  
    Series RFL The in-line flow regulator regulates the speed of the piston rod in the pneumatic cylinders.
    Two versions are available:
  • type U (unidirectional) regulates the flow only in one of the two directions of air flow.

  • type B (bidirectional) regulates the flow in both directions of air flow.

  • Regulation: manual or with a screw driver.
    Max. temperature 70 °C (158 °F)
    Max. pressure: 10 bar (1Mpa-145psi)

    Please note this is only a small selection of our Pneumatics range.
    Contact us for a catalogue or further details.


    © Pneutube Ltd 2014 All rights reserved